Outdoor Solar Infrared Alarm

1. Solar panel: 5V, 60mA multi product solar panel.

2. Charging mode: solar charging for 8-10 hours, DC charging for less than 1 hour.

3. Working condition: start working after 30s.

4. Alarm sound: 100 dB.

5. Battery parameters: 3 7V, 1200mAH, 18650 lithium battery.

6. Sensing distance: 5-8m (affected by environment, temperature and installation height).

Operating instructions, the principle is similar to the remote impactor)

Infrared building rear one

1. First gear: infrared portrait sensing rear sensing lamp mode.

2. Second gear: audible and visual alarm mode.

3. Third gear: flash silent mode, until the alarm senses a person, enter the audible and visual alarm mode.

4. Fourth gear/remote control 0FF key: power off.

5. Remote control ON key: permanently lit mode.

Tips: When the gear is switched, the host machine will have an interval of about 30 seconds (during this period, the product is in the waiting state and will not work),Then enter the active state.

Note: When the solar energy is charged, the product is in the waiting state and will not work.